problem mit SecureClient und IpSec

[Gast]

Ich habe einen problem mit SecureClient, ohne router functionierts (- SecureClient config muss ok sein), auf english ist leichter.... but when I put the router in the link, the problem starts.

My PC is setup with dynamic address 192.168.0.100 which I have also fixed as a static address in the router config against the MAC.

The router is set to default IP 192.168.0.1.

I have setup the router within virtual server so that port 500 is open;
IPSec 192.168.0.100 UDP 500 / 500 always

The wan is setup as;
Others PPTP , BigPond Cable , L2TP and Telia.
PPTP (for Europe use only)

PPTP
Dynamic IP

However the corresponding SecureRouter never responds.

When I look into the IP trace I can see that my computer is sending out on (Source address 192.168.0.100,Dest. 192.168.0.1) port 500 an ISAKMP header. But this is then responded to by the Router with an "ICMP Port unreachable"?

Und ich habe die letzte firmware installiert;
Current Firmware Version: V3.06b01
Firmware Date: Fri, Aug 27 2004

What have can be wrong???

Any help is much apprieciated, since I have been trying to solve this problem on and off for a long time. I have also tried DMZ but this did not seem to make any difference.

[Empfehlungen]

[Gast]

Kann niemand mir helfen :( , auf deutch gehts Auch :!:
Richard